LED night light Smart Infrared/Touch Sensor Lamp Charger dimmable With light control function

Instruction
1. Insert the product into the matching socket. After the product is powered on, the initialized light will be on for about 10 seconds. After the light is turned off, the product will enter the normal use state.
2. Insert the USB cable into the USB interface, you can charge the mobile phone, charger and other electronic products. Two USB interfaces can identify the maximum acceptable current of electronic products and intelligently allocate it, with A maximum output of 5V /2.4A.
3. After the product is initialized, the lamp will automatically enter the infrared (human body) induction mode and the indicator will go off. When the ambient brightness is greater than 15Lux, the lamp will not work and will be in standby state. When the ambient brightness is lower than 15Lux, the light will automatically turn on the lighting when people move in the detection range. When people leave, will continue to light 30S or so, automatically shut down.
4. Click the touch switch for the first time, the indicator light will light up .the light will be converted to normal mode.
5. Click the touch switch for the second time, turn off the light function. the indicator light is on.
6. Click the touch switch for the third time, the indicator light will go off. After 3 seconds, it will enter the infrared (human body) induction mode, and so on.
7. When the light is on in both modes, Hold the touch switch and the brightness will dimming stepless. After the hand leaves the touch switch, press and hold the touch switch again, the brightness will bright stepless. and so on. After adjusting to the appropriate brightness, release the hand, the light will automatically remember the brightness.

Attention
● Operating temperature in -10℃ ~ +35℃
● Do not place lamps in inflammable, explosive, damp and unstable places.
● Do not place the lamps in flammable, explosive, humid and unstable places. Do not install them in places where the air flow and temperature change greatly (such as near Windows, air conditioners, fans, stoves, etc.).
● Do not pour or immerse the product in water.
● When the product is not used for a long time, pull it out of the socket and put it in a dry place.
● When the product is abnormal, please cut off the power, and then pull it out from the socket, and ask electrical professionals to repair.