Smart touch Sensor Lamp Charger led night lights dimmable wall cabinet kitchen ceiling lighting

Instruction
1. Insert the product into the matching socket. After the product is powered on, the product will enter the normal use state after initialization for about 3 seconds.
2. The light function and the USB charging function can be used at the same time without interfering with each other.
3. Insert the USB cable into the USB interface, you can charge the mobile phone, charger and other electronic products. Two USB interfaces can identify the maximum acceptable current of electronic products and intelligently allocate it, with A maximum output of 5V 2.4A
4. Click the touch switch for the first time, 10% brightness.
5. Click the touch switch for the second time, 40% brightness.
6. Click the touch switch for the third time, 100% brightness.
7. Click the touch switch for the third time. Turn off the light, and so on.

Attention
● Operating temperature in -10℃ ~ +50℃
● Do not place lamps in inflammable, explosive, damp and unstable places.
● Do not place the lamps in flammable, explosive, humid and unstable places. Do not install them in places where the air flow and temperature change greatly (such as near Windows, air conditioners, fans, stoves, etc.).
● Do not pour or immerse the product in water.
● When the product is not used for a long time, pull it out of the socket and put it in a dry place.
● When the product is abnormal, please cut off the power, and then pull it out from the socket, and ask electrical professionals to repair.